Thursday, April 28, 2011

Dr Fate helmet: Fiberglass and Bondo


So, I skipped some pictures, sorry about that.

The fourth Dr. Fate helmet, as I said, was close enough that I didn't feel the need to make a fifth one. The first picture is of me after I cut the helmet, to see how much of a gap was needed to be added. I didn't add as much as is shown there, but I took the picture just to give me an idea of the size. I'm very proud that my very first attempt at a sizing picture actually worked, by the way. I just held my phone away from me and clicked the picture.

After I got the sizing done, I added some fiberglass resin to the outside and inside of it, which made my studio stink so bad that I abandoned the room for a couple of days. Note, do this crap outside if you plan on doing it.

Next I reread everything I could find about turning pepakura (papercraft) files into wearable stuff, and started the awful task of fiberglassing the inside. I used fiberglass cloth and more of the resin for that.
Side note, the resin, the cloth and the bondo all came from WalMart. This stuff is easy to find. It is with the tools/automotive stuff, all right together.

Today, I sanded the devil out of the Fate helmet, inside and out. I wore a respirator, goggles, gloves, and long sleeves to do this, and I did it out on my front porch, that way my neighbors will fear me. I did it outside and wearing all that gear because I am slightly phobic of fiberglass.

Next up, as seen in the second picture, I covered all my hard work in a layer of goopy bondo body filler. Now my cool paper helmet is pink. Pink, and as hard as a car part, I might add. (Also, seen in the picture, bird poops on my porch. That's what I get for having a bird feeder)

Later, I'm going to be sanding down the bondo, fixing any gaps that show up, checking and rechecking the symmetry of it, then eventually painting the whole thing brilliant and gaudy gold.

More to come as I get there!

Also, as for my sculpting progress:

I cut down a styrene ball to the shape I wanted for a large doll's head, then sculpted the head in super sculpy. I didn't take a picture before baking it, but trust me, it was cute.

After baking, I found that my cute sculpted head had shattered. I started over, but I first reinforced the styrene so that it wouldn't expand or anything to cause another break.

I resculpted the head in super sculpy, baked it again, and again, it busted. GAH!!!

I'm not giving up on this doll, just so you know. The next step is trying my hand at paperclay for the first time. Pictures and what not will follow.

2 comments:

  1. hello friend I could send the helmet pdo ami mail: abdel.94.ab @ gmail.com thx

    ReplyDelete
    Replies
    1. I'm afraid I don't have the file any more. My old computer's hard drive died, taking the PDO with it.

      Delete